电竞下注

Contact


Contact: Miss Shu / Mr. Lee

Tel: 0769-81876026

Phone: Miss Shu 13310808818

        Mr. Li 13538665999

Q   Q: Miss Shu 2587009917

        Mr. Lee 766744210


Whatsapp: 18711168957 (Marisa)

E-mail: 

sales@xlbvip.com

Address:

502, 5th floor, Minghuizhi Park, 305 Kangli Road, Dalang Town

Automatic locking screw machine manufacturers tell you automatic locking screw machine on the screw requirements

Your current location: Home >> News >> Technical Knowledge

Automatic locking screw machine manufacturers tell you automatic locking screw machine on the screw requirements

Date:2017-09-13 Author: Click:

Automatic locking screw machine manufacturers tell you automatic locking screw machine on the screw requirements

Automatic screw machine was born, is to comply with the requirements of the development of the market, through the equipment to improve efficiency and reduce labor, it is the basic factor of automation development. Usually under the condition of hand-held locking screw machine lock 50 yuan per minute, Traditional electric screwdriver can not be done, but multi-axis automatic screw locking machine, while locking multiple screws, the efficiency is 2-5 times the traditional equipment, it is out of reach of traditional equipment. Of course, these devices are Is within the scope of its use to do, by understanding the working principle of automatic locking screw machine can be clearly aware of the scope of its use. Each manufacturer may have different automatic locking screw machine applications, non-standard automation equipment, no A fixed number, here we will sign the new automatic locking screw machine used in detail, for your reference.

Automatic lock screw machine screw length requirements

Under normal circumstances, we require that the screw length is greater than 1.2 times the nut diameter, mainly to prevent the process of turning over, the proportion is too small can not ensure the quality of automatic feeding

In theory, the automatic locking screw machine can be used for any length of the screw, because in the actual design, the screw length is too long, will affect the material body, and the stability of conveying function, some long screws in the actual production design and Not practical, usually Fushida automatic locking screw machine to meet the total length of the screw is less than 30mm. If the product is too long screws, and must use the automatic locking screw machine, it is recommended to replace the screw model

 

Automatic lock screw machine

 

Many manufacturers for a variety of reasons, will increase the gasket on the screw, with a gasket screw can use the automatic locking screw machine?

What can not be generalized, there are many kinds of screws with shims:

1. For those who need to manually place the washer screw is not suitable, here mainly to consider the efficiency factor, the design concept of automatic locking screw machine is automatic feeding, automatic lock pay, the feeding speed is not questioned, but if Lock to manually place the shims, from the efficiency point of view, this device has lost its original advantages, especially multi-axis and coordinate, can not play its due value,

2. Gaskets and screws fixed screws, screw types more, some with a screwdriver screw design is more suitable for automatic locking screw machine use, similar to the following several shim screws can be used by the FST Automatic locking screw machine, to improve the locking efficiency。

Url:/en/news/383.html

Tag:

Browse:

Products:

News:

  • Miss ShuMiss Shu
  • Mr. LiMr. Li
Erq

Scan code

Share 一键分享
XML 地图 | Sitemap 地图