电竞下注

Contact


Contact: Miss Shu / Mr. Lee

Tel: 0769-81876026

Phone: Miss Shu 13310808818

        Mr. Li 13538665999

Q   Q: Miss Shu 2587009917

        Mr. Lee 766744210


Whatsapp: 18711168957 (Marisa)

E-mail: 

sales@xlbvip.com

Address:

502, 5th floor, Minghuizhi Park, 305 Kangli Road, Dalang Town

Automatic locking screw machine requirements on the screw

Your current location: Home >> News >> Industry news

Automatic locking screw machine requirements on the screw

Date:2017-09-28 Author: Click:

Automatic locking screw machine requirements on the screw

Automatic screw machine was born, is to comply with the requirements of the development of the market, through the equipment to improve efficiency and reduce labor, it is the basic factor of automation development. Usually under the condition of hand-held locking screw machine lock 50 yuan per minute, Traditional electric screwdriver can not be done, but multi-axis automatic screw locking machine, while locking multiple screws, the efficiency is 2-5 times the traditional equipment, it is out of reach of traditional equipment. Of course, these devices are Is within the scope of its use to do, by understanding the working principle of automatic locking screw machine can be clearly aware of the scope of its use. Each manufacturer may have different automatic locking screw machine applications, non-standard automation equipment, no A fixed number, here we will be fully automatic locking screw machine using a detailed list, for your reference.

Automatic lock screw machine screw length requirements

Under normal circumstances, we require that the length of the screw is more than 1.2 times of the diameter of the nut, mainly to prevent the turning over during the conveying process. If the proportion is too small, the quality of the automatic feeding can not be ensured. As shown in the figure, the screw is not suitable for the automatic locking screw machine

Automatic locking screw machine

       

Automatic lock screw machine

 

Automatic lock screw machine screw length requirements

In theory, the automatic locking screw machine can be used for any length of the screw, because in the actual design, the screw length is too long, will affect the material structure, and the stability of conveying function, some long screws in the actual production design and Not practical, usually automatic locking screw machine to meet the total length of less than 30mm screws.If the product is too long screw, and must use the automatic locking screw machine, it is recommended to replace the screw model, the following screws can no longer fully automatic locking screws Used onboard

Automatic screw machine

Automatic locking screw machine can be used for gasket screws

Many manufacturers for a variety of reasons, will increase the gasket on the screw, with a gasket screw can use the automatic locking screw machine?

What can not be generalized, there are many kinds of screws with shims:

1. For those who need to manually place the washer screw is not suitable, here mainly to consider the efficiency factor, the design concept of automatic locking screw machine is automatic feeding, automatic lock pay, the feeding speed is not questioned, but if Lock to manually place the shims, from the efficiency point of view, this device has lost its original advantages, especially multi-axis and coordinate, can not play its due value,

2. Gaskets and screws fixed screws, screw types are more, some with a screwdriver screw design more suitable for automatic locking screw machine use, similar to the following several shim screws can be used by the automatic lock Screw machine, to improve lock efficiency

Url:/en/news/384.html

Tag:

Browse:

Products:

News:

  • Miss ShuMiss Shu
  • Mr. LiMr. Li
Erq

Scan code

Share 一键分享
XML 地图 | Sitemap 地图