电竞下注

Contact


Contact: Miss Shu / Mr. Lee

Tel: 0769-81876026

Phone: Miss Shu 13310808818

        Mr. Li 13538665999

Q   Q: Miss Shu 2587009917

        Mr. Lee 766744210


Whatsapp: 18711168957 (Marisa)

E-mail: 

sales@xlbvip.com

Address:

502, 5th floor, Minghuizhi Park, 305 Kangli Road, Dalang Town

Automatic locking screw machine in the fan industry

Your current location: Home >> News >> Technical Knowledge

Automatic locking screw machine in the fan industry

Date:2017-10-12 Author: Click:

Automatic locking screw machine in the fan industry

Fan types are ceiling fans, table fans and floor fan, different products need to use different automatic locking screw program, where the rotary table and desktop automatic screw machine to introduce.

Ceiling fan rotary automatic locking screw machine

The product is a ceiling fan motor, the use of left hexagonal screw fastening, screw with a washer, a round gasket diameter of 12mm, the total length of the screw 15mm

Here 6-axis rotary automatic locking screw machine, configuration 6 jig, mainly due to the product before the screws need to place 3 paper shims, placing the workpiece with a paper shim placed more than automatic locking screw machine screws Time, screw a good time 6 screws usually 3 seconds, you can use double placed products, skilled operation can be placed one person later.

Fan lock screw machine

This production is placed more efficient than the traditional way there is a very substantial increase in the entire screwing process is only 3 seconds that is 3 can screw a workpiece is three times the traditional way,

Rotary automatic locking screw machine is simple, employees only need to take a simple product can be put, the device automatically send 6 screws, and automatically screw a good, rotary benefits is that you can place the product at the same time tighten the screws, pipelining, No need to wait, save a lot of time

Desk fan desktop automatic locking screw machine

Fan Shaker A fan swinging angle regulator that allows you to adjust the angle of the fan's swinging head for variable air flow. Commonly used in landing fans, industrial fans.

Automatic lock screw machine

  

There are three screws need to tighten the product, in order to improve production efficiency, here with double-station, dual-platform coordinate automatic locking screw machine.

Desktop automatic locking screw device advantages:

High efficiency: about 3600-4000 screws per hour, no waiting time;

Easier: a single device workers needed 1 people, just complete the loading and unloading;

Reliability: Configure sliding teeth, floating locks, leak detection and automatic alarm function, can work more than 20 hours a day;

Versatility: For locks the same screw products, simply replace the fixture, can lock different products, through simple programming, you can put into production, which greatly facilitates the production of enterprises;

Good image: intelligent automation equipment to make the production of a new scene, establish high-tech enterprise image.

Provincial cost: a single person can operate efficiently, 1 person is equivalent to 3 people's efficiency;

A single platform can be placed on the fixture of 20 products, the use of double-electric screwdriver, screwing two screws at a time, can be doubled to improve production efficiency, dual-platform products can be achieved simultaneously pick and place, screw the device while screwing, the staff can be another A station to place the product, a substantial saving of time. Simple operation, employees simply place the product, the product fixture design science, easy to pick and place the product quickly.

Desktop lock screw machine details

1. Mainly by the automatic screw conveyor system, X-Y-Z mobile platform, control system and lock-payment system;

2. Applicability, replacement of products, simply replace the fixture, the device program separately saved, the corresponding procedure can be transferred out;

3. Feeding sensor control, a lock to pay one, automatically feeding, there will be no repeat feeding phenomenon;

4. Sliding teeth do not feed: In the lock to pay the project, the torque does not reach, the screws do not send, to prevent the batch mouth appear stuck material phenomenon;

5. Good stability, no card material, even if bad lead to jam, non-professionals can also solve the card within a few seconds;

6. High efficiency, generally a second hit a screw, do not grab the screw, just put the product on the fixture on the operating equipment can be;

7. It can reduce the workload of 3 workers in locking the screws, realize fully automatic production, reduce labor intensity and increase productivity;

8. The key parts of high-quality hardware materials and special treatment, the original electronic components imported, to ensure zero-defect equipment.

Url:/en/news/385.html

Tag:

Browse:

Products:

News:

  • Miss ShuMiss Shu
  • Mr. LiMr. Li
Erq

Scan code

Share 一键分享
XML 地图 | Sitemap 地图